Kit car no 3 projects

Need help from a fellow owner, something to air - discuss away!

Moderator: Contaminated

User avatar
Wingco
Posts: 2763
Joined: Thu Jul 26, 2012 9:49 am
Location: Swanley, Kent
Contact:

Re: Kit car no 3 projects

Postby Wingco » Tue Jan 02, 2024 6:45 pm

Good update Richard, hope you get all those things sorted so you can start to enjoy yourself back out in the car.
Any updates on the blue car ?
Mirror, Signal go faster pedal !!

User avatar
locost220
Posts: 4497
Joined: Sat Mar 13, 2010 7:31 pm
Location: Lewisham South London
Contact:

Re: Kit car no 3 projects

Postby locost220 » Tue Jan 09, 2024 10:20 am

Let’s see if I can more pics to attach this time.
Attachments
IMG_5890.jpeg
IMG_5892.jpeg
IMG_5534.jpeg
IMG_5435.jpeg
IMG_5429.jpeg
IMG_5436.jpeg
IMG_5420.jpeg
IMG_5398.jpeg
IMG_5397.jpeg
IMG_5348.jpeg
IMG_5345.jpeg
IMG_5344.jpeg
IMG_5343.jpeg
IMG_5328.jpeg
IMG_5319.jpeg
IMG_5318.jpeg
IMG_5309.jpeg
IMG_5301.jpeg
IMG_5297.jpeg
IMG_5299.jpeg
Locost book chassis, Undergoing testing post rebuild :D :?
Robin Hood 2B, keeping me sane
Sylva Leader, stuck to the trailer

User avatar
locost220
Posts: 4497
Joined: Sat Mar 13, 2010 7:31 pm
Location: Lewisham South London
Contact:

Re: Kit car no 3 projects

Postby locost220 » Tue Jun 18, 2024 9:22 pm

Well it been a while since I updated this thread and as always not been out anywhere enough in the RH due to welding up more rusty transits. So apart from the odd Sunday breckie run the first and longest time with the car was this years tour of the Yorkshire moors with the rouge runners that was a bit eventful but completed in one piece ( with a longer to do list ), that was followed the following weekend by a weekend trip to the Malvern kit car show so once back I decided to have a go investigating the long standing and elusive squeaking rear suspension.
So over the past few evening I have removed both the rear shocks so I can lift the rear swing arms to try and recreate the noise to a small effect. Swing arm bushes sprayed in half a can of WD40 as a short term measure in favour of some duck oil to follow, this had similar effect but still not found the elusive noise. So I decided to strip down and inspect the bushes and brackets of the Gaz coil overs.
Still no definite cause as yet but I have inserted some plastic washers and coated everything in white marine grease, weld repaired and painted the bottom bracket and just managed to reinstall the drivers side till time allows the other to receive the same
Attachments
IMG_8434.jpeg
IMG_8433.jpeg
IMG_8432.jpeg
IMG_8324.jpeg
IMG_8325.jpeg
IMG_8166.jpeg
IMG_8123.jpeg
IMG_8110.jpeg
IMG_7840.png
IMG_7767.jpeg
IMG_7711.jpeg
IMG_7689.jpeg
IMG_7634.jpeg
Locost book chassis, Undergoing testing post rebuild :D :?
Robin Hood 2B, keeping me sane
Sylva Leader, stuck to the trailer

User avatar
DJ.
Posts: 6037
Joined: Mon May 30, 2011 7:31 pm
Contact:

Re: Kit car no 3 projects

Postby DJ. » Fri Jun 21, 2024 12:57 pm

Great photos, I hope you get the noise sorted.

User avatar
locost220
Posts: 4497
Joined: Sat Mar 13, 2010 7:31 pm
Location: Lewisham South London
Contact:

Re: Kit car no 3 projects

Postby locost220 » Sun Jun 23, 2024 4:36 pm

Well after reassembling the brackets on the shocks with more plastic washer / spacers with loads of marine grease and the coil overs set as they were, refitted and another half a can of duck oil emptied on the 4 swing arm bushes I could just about see I decided rather than let it sit for at least another week I wanted to test for squeaks before anything had a chance to dry out. So up and down the local back streets attached to mine but avoiding the Khan tax main road (Ukez zone ) lucky for me the place is riddled with speed humps so 20 mins later all was still silent so well pleased at this point and excited to see if it persists.
Locost book chassis, Undergoing testing post rebuild :D :?
Robin Hood 2B, keeping me sane
Sylva Leader, stuck to the trailer


Return to “Car Related Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests