It needs:
The engine sorting as it struggles to get oil pressure up initially when starting.
Various front panels replacing/repairing.
So this morning I removed the engine and gearbox and pressure washed under the bonnet. I’ve taken the head off the engine and now need to get the flywheel off so I can split the engine and gearbox, to do this i needed a puller which I have now borrowed one so may have a go at that later tonight.
Then stripped all the lights and bits off the front and started cutting off the front panel. It also needs one wing replacing.
I then took the screen out to look at the scuttle panel which was scabby I’ve ground the rough bit off and found someone had previously bodged it so I’m going to cut the hole out neater and weld in a plate rather than replace the whole panel as that will be a pain to do.
