Page 1 of 2
fast ford meet
Posted: Sat Sep 07, 2013 7:23 pm
by Martin S
Just to let y,all no there is a fast ford meet this sunday at rowfant house crawley rh10 4ng trade stands ect ,going up in tin top to talk to ashton motors about a new engine
Re: fast ford meet
Posted: Sat Sep 07, 2013 7:27 pm
by DJ.
There is a lot on this Sunday!
I'm not allowed out to play, as it's my daughters birthday.
Does that mean your planning a duratec installation then?
Re: fast ford meet
Posted: Sat Sep 07, 2013 7:50 pm
by steve m
So, am I allowed in my 7 ?
as its used to be a rusty ford escort mk11 ?
Re: fast ford meet
Posted: Sat Sep 07, 2013 7:54 pm
by Nash
steve m wrote:So, am I allowed in my 7 ?
as its used to be a rusty ford escort mk11 ?
Careful Steve I've heard they are stripping kitcars for the parts to restore Mk1 and 2 Escorts......... I kid you not
Re: fast ford meet
Posted: Sat Sep 07, 2013 8:30 pm
by Martin S
Going to work out the cost,but do like my old pinto,so might go for a complete rebuild,just to say went to beaulieu today for the classic auto jumble loads of rusty fords there
Re: fast ford meet
Posted: Sat Sep 07, 2013 8:40 pm
by locost220
as long as you do not go to the dark side or should i say passengers side with your exhaust.
Rich.
Re: fast ford meet
Posted: Sat Sep 07, 2013 8:48 pm
by Martin S
Re: fast ford meet
Posted: Sat Sep 07, 2013 8:55 pm
by DJ.
Exhaust on the drivers side is good if you want your wife to come in the car, I burned my leg on my silencer this summer
Re: fast ford meet
Posted: Sun Sep 08, 2013 7:38 am
by steve m
or
Exhaust on the passenger side is good if you do not want your wife to come in the car, and my girlfriend burned her leg on my silencer a couple of years ago
Re: fast ford meet
Posted: Sun Sep 08, 2013 8:30 am
by hearntd
DJ. wrote:Does that mean your planning a duratec installation then?
I can recommend that as an idea!! my old pinto makes a very effective paper weight now ....