Hi from a newbie to kit cars

So you've just joined, why not say a few words to introduce yourself - a bit about you, your car - whatever!

Moderator: Contaminated

User avatar
Nash
Posts: 9877
Joined: Thu Mar 04, 2010 9:12 pm
Location: near Ashford, Kent
Contact:

Re: Hi from a newbie to kit cars

Postby Nash » Sun Jul 17, 2016 9:35 am

paul.latham wrote:Thanks for the advice! I will defiantly change them in that case.
Is there another style that fits in the same holes?


Paul, not trying to spam my video but if you scroll through to 6'14" you can see the aero catches I use on my Indy. I have them at the rear and the front I cut slots in the bonnet retaining edge and a bolt in the chassis to create a forked catch.


https://youtu.be/qU2nincr4Qs

Hope that helps
Buckle Up - Adventure Calls

paul.latham
Posts: 17
Joined: Fri Jul 15, 2016 10:03 am
Contact:

Re: Hi from a newbie to kit cars

Postby paul.latham » Sun Jul 17, 2016 7:38 pm

Sun was out! So had a blast and took some updated pictures.
Forgot to do the engine bay. Looks much better without the plywood battery box.
Oh well you will just have to believe me.
Attachments
image.jpeg
image.jpeg
image.jpeg
image.jpeg
image.jpeg

paul.latham
Posts: 17
Joined: Fri Jul 15, 2016 10:03 am
Contact:

Re: Hi from a newbie to kit cars

Postby paul.latham » Sun Jul 17, 2016 7:47 pm

Nash wrote:
paul.latham wrote:Thanks for the advice! I will defiantly change them in that case.
Is there another style that fits in the same holes?


Paul, not trying to spam my video but if you scroll through to 6'14" you can see the aero catches I use on my Indy. I have them at the rear and the front I cut slots in the bonnet retaining edge and a bolt in the chassis to create a forked catch.


https://youtu.be/qU2nincr4Qs

It says the video is not available?

Hope that helps

User avatar
SJLB
Posts: 576
Joined: Sat May 31, 2014 5:31 pm
Contact:

Re: Hi from a newbie to kit cars

Postby SJLB » Sun Jul 17, 2016 8:55 pm

Welcome to the club Paul. Good to see another BEC too!
Steve
Westfield Megabusa, Bromley, Kent.

User avatar
Nash
Posts: 9877
Joined: Thu Mar 04, 2010 9:12 pm
Location: near Ashford, Kent
Contact:

Re: Hi from a newbie to kit cars

Postby Nash » Sun Jul 17, 2016 9:35 pm

paul.latham wrote:
Nash wrote:
paul.latham wrote:Thanks for the advice! I will defiantly change them in that case.
Is there another style that fits in the same holes?


Paul, not trying to spam my video but if you scroll through to 6'14" you can see the aero catches I use on my Indy. I have them at the rear and the front I cut slots in the bonnet retaining edge and a bolt in the chassis to create a forked catch.


https://youtu.be/qU2nincr4Qs

It says the video is not available?

Hope that helps


What are you watching it on? Some but not all ( don't ask me why?!) mobile devices struggle due to the music copyright although it's only USA and Canada that it's not watchable. Try a desktop if possible.
Buckle Up - Adventure Calls


Return to “New Members - Say Hello Please”

Who is online

Users browsing this forum: No registered users and 13 guests